Lacie Hard Drive One Volume Vs Two Volumes

This article shows how to repair a LaCie external hard drive with corrupted, not working, unrecognized or 'fails to show up' error without losing data. First, you need to follow provided methods on this page to repair the corrupted LaCie external hard drive. Next, download EaseUS hard drive recovery software to recover data from the LaCie external hard drive. Can t find wd external hard drive.

1. Lacie Hard Drive One Volume Vs Two Volumes Equal
2. Lacie Hard Drive One Volume Vs Two Volumes Volume
3. Lacie Hard Drive One Volume Vs Two Volumes Of One

Step 2: Then create a spanned volume that can occupy the whole unallocated spaces on two hard drives. Right-click one unallocated space, and then select the New Spanned Volume feature. Then click Next. Next, select and add unallocated space on another disk, assign a drive letter for the volume, format it to NTFS/FAT32, and finally click Finish. Fixed - Diskpart list volume there are no volumes. If your external hard drive cannot be recognized by its file system, you can try this way and change the file system of the external hard drive. Before continuing to see below, download AOMEI Partition Assistant Standard, install and launch it.

This page covers the most complete LaCie external hard drive troubleshooting tips to help you fix and repair LaCie disks. If your LaCie drive is not recognized or corrupted, please take it easy!

Follow the provided solutions on this page to get rid of this issue and make your device work again.

LaCie is a storage device producer. It manufactures universal types of external hard drives, SSDs, HDDs, and even network storage services for worldwide users to storing their personal files and business data. People always use it for saving backups. With huge storage capacity, it's widely used for saving lots of files such as photos and videos.

LaCie external hard drive becomes excessively popular among users due to its high capacity and fast performance. However, according to the LaCie support community and the Google search result, LaCie external hard drive users have also encountered some problems while using its external hard drives and internal HDDs/SSDs.

Here, we'll take LaCie Porsche Design as an example to show you how to troubleshoot all types of external hard disk problems without losing any data.

Why Is My LaCie Not Working

Normally, a lot of issues may cause an external hard drive not working, not turning on, or malfunctioning. Learning the causes will help you find the right solutions immediately. Here are the main causes of why your LaCie external hard drives are not working:

• Problematic connection (between drive and computer)
• RAW or invalid file system error
• File system corruption
• Drive letter conflict
• Drive is unallocated, no partition
• New drive is not initialized
• Drive driver is outdated
• Drive is hidden from showing up on the computer
• Virus, malware infection

LaCie External Hard Drive Troubleshooting Tips

So how to fix the LaCie external hard drive not working issue on your own without losing any data? Here we'll take LaCie Porsche Design as an example to show you how to successfully repair LaCie external hard drive from the following issues:

Note that as some troubleshooting methods presented here may cause file loss issues, it's recommended that you take reliable data recovery software as shown in the first case to bring your files out of the device first. EaseUS Data Recovery Wizard is good for you to try.

Now, let's move to the right fixes to troubleshoot your external hard disk not working, not turning on, not showing up error with ease.

Case 1. Fix LaCie External Hard Drive Data Loss Error with Data Recovery Software

Applies to: Scan LaCie external hard drive and recover lost data due to deleting, formatting, RAW, and even inaccessible error.

Mostly, when your external hard drive or internal hard drive is not working or not showing up, what comes first is to perform data recovery on the device. So keep this in your mind:

1. 1. Stop using the device when you lost data on it.
2. 2. Turn to professional data recovery software for help.

Here, we'd like to recommend you try EaseUS data recovery software - Data Recovery Wizard. No matter what causes file loss on your drive, as long as your drive can be detected by Windows Disk Management, this software can work and help.

Here is the step-by-step guide that you can follow to recover data from the LaCie external hard drive immediately:

Step 1. Choose the external hard drive

Since you're going to recover data from the external hard drive, run EaseUS Data Recovery Wizard and under the External Devices tab, choose the exact drive where you lost data. Click Scan.

Step 2. Scan for lost data

The software will start immediately to scan all over the selected drive for all lost data. During the scan, you could see more and more data showing up in the results.

Step 3. Preview and recover data

After the scan is over, check the scan results for the desired data. You can preview the file by double-clicking on it. Click Recover and choose another location to save the recovered data.

After this, remember to save the restored files and data to another secure device before making the device work again. If your computer cannot detect the LaCie external hard drive, follow the tips as shown below to make it detectable first.

Case 2. Fix LaCie External Hard Drive Light Blinking, Not Working

Applies to: Fix LaCie external hard drive light blinking error due to unstable power supply issue.

To fix this issue, you have two options to try:

1. Reconnect the LaCie power cable

If the power LED light is blinking, connect the power cable to the external drive and then connect the power supply to a live power outlet.

3 tb backup drive. 2. Disable Save Power Mode in USB Root Hub

Step 1. Keep the LaCie external hard drive connected to your computer.

Step 2. Press Windows + X or right-click the Windows icon, select 'Device Manager'.

Step 3. Locate and expand the Universal Serial Bus controllers.

Step 4. Right-click 'USB Root Bub' of your external hard drive and select 'Properties'.

Step 5. Go to the Power Management tab, then uncheck 'Allow the computer to turn off this device to save power'.

After this, restart your PC and reconnect the Lacie external hard drive to your computer. Then you can check out if your drive is showing up. If it still not turning on, continue reading with the fixes as shown in the next parts.

Case 3. Fix LaCie External Hard Drive Not Turning On

Laptop can t find external hard drive. Applies to: Fix LaCie External hard drive not turning on issue due to problematic connection.

Sometimes, the 'external hard drive not turning on' issue is also known as 'external hard drive won't power up'. Besides the above two methods presented in Case 2, you can also try the following tips to make the LaCie external hard drive turning on and show up on your computer again:

Step 1. Check if the power cable of your external hard drive is broken.

If yes, change a new power cable, and reconnect the disk to your computer tightly.

Step 2. If the power cable is good, switch a USB port and reconnect LaCie to your PC.

Check if the drive shows up or not.

Step 3. https://ameblo.jp/085grannepakefr/entry-12650906489.html. If the drive doesn't show up at all after you've tried all the USB ports on the computer, try to connect it to a new computer.

Make sure that each time you reconnect the drive, the cables are correctly and tightly connected between your external drive and computer.

Case 4. LaCie External Hard Drive Not Showing Up/Detected/Recognized

Applies to: Fix LaCie external hard drive not showing up, detected error due to RAW or unsupported file system, drive letter conflict, partition loss error.

As the causes of an external hard drive not working are complex, we suggest you connect the LaCie external hard drive to your computer and open Disk Management to check its state so as to follow the respective methods as listed here for help:

• LaCie Shows as RAW, or *Others, Unsupported File System - Format to Reset LaCie Detectable
• LaCie Shows as New Volume with No Drive Letter - Assign a New Drive Letter
• LaCie Displays as Unallocated - Create New Volume

Let's follow the right fixes here to repair and make your LaCie external hard drive work again.

#1. Format and Reset LaCie External Hard Drive to (NTFS) Detectable

Step 1. Right-click on This PC/My Computer, select 'Manage'.

Step 2. Click 'Disk Management', locate and right-click the RAW external hard drive partition, then choose 'Format'.

Step 3. Select NTFS as the file system for the partition and click 'OK' to confirm.

#2. Assign a New Drive Letter to Make LaCie Showing UP

Step 1. Press 'Windows' + 'X' at the same time, select and open Disk Management.

Step 2. Right-click the external hard drive partition and select 'Change Drive Letter and Path…'.

Step 3. In the pop-up window, click 'Add' to assign the drive letter to your LaCie external disk.

#3. Create a New Volume on Unallocated LaCie External Hard Disk

Step 1. Open Disk Management and locate the unallocated space of LaCie external hard drive.

Step 2. Right-click on the unallocated space and select 'New Simple Volume'.

Step 3. Assign a new drive letter to the disk, set NTFS as its file system, click 'Next'.

Step 4. Follow the on-screen guidelines to create a new partition on the LaCie external hard disk and click 'Finish' to complete.

Bonus Case: LaCie device shows as No Media

If the LaCie external hard drive shows No Media in Disk Management, what you can do is very less. All you can do is to go back to case 5 and update the device driver. Then try to change the drive letter in Disk Management, and format it to NTFS.

If none of these tips work, your last tryout is to take the disk to a disk repair center for help.

Case 5. LaCie External Hard Drive Not Working/Responding

Applies to: Fix LaCie external or internal hard drive not working or responding error due to outdated driver.

#1. Update LaCie External Hard Drive Driver

Step 1. Keep the LaCie external hard disk connected to your PC.

Step 2. Click on 'Start' and type devmgmt.msc to open 'Device Manager'.

Lacie Hard Drive One Volume Vs Two Volumes Equal

Step 2. Expand'Disk drives', right-click your LaCie external hard drive and select 'Update driver'.

Restart the computer andthen check out whether any device shows up as unrecognized or not.

#2. Uninstall Universal BUS Controllers' Drivers

Step 1. Connect LaCie external hard drive to PC andOpen Device Manager.

Step 2. Expand Universal Serials Bus controllers and right-click each USB Hub, select 'Uninstall device'.

Step 3. After this, restart the PC, and Windows will automatically update and reinstall them for you.

Then you can check out if your LaCie disk is detectable by the computer.

To Sum Up

On this page, we listed the possible causes of LaCie external hard drive not working issue and listed 7+ Lacie external hard drive troubleshooting tips to help you repair not working, not showing up, not responding, and even not recognized drive to a normal state.

Note that, no matter which method you tend to try, remember to apply EaseUS data recovery software to scan and restore all your valuable files from the disk to another secure location first.

In computer data storage, a volume or logical drive is a single accessible storage area with a single file system, typically (though not necessarily) resident on a single partition of a hard disk. Although a volume might be different from a physical disk drive, it can still be accessed with an operating system's logical interface. However, a volume differs from a partition.

Differences between volume and partition[edit]

A volume is not the same thing as a partition. For example, a floppy disk might be accessible as a volume, even though it does not contain a partition, as floppy disks cannot be partitioned with most modern computer software. Also, an OS can recognize a partition without recognizing any volume associated with it, as when the OS cannot interpret the filesystem stored there. This situation occurs, for example, when Windows NT-based OSes encounter disks with non-Microsoft OS partitions, such as the ext3 filesystem commonly used with Linux. Another example occurs in the Intel world with the 'Extended Partition'. While these are partitions, they cannot contain a filesystem directly. Instead, 'logical drives' (aka volumes) must be created within them. This is also the case with NetWare volumes residing inside of a single partition. In short, volumes exist at the logical OS level, and partitions exist at the physical, media specific level. Sometimes there is a one-to-one correspondence, but this is not guaranteed.

In Microsoft Windows Server 2008 and onward the term 'volume' is used as a superset that includes 'partition' as well.^[1][2][3]

It isn't uncommon to see a volume packed into a single file. Examples include ISO9660 disc images (CD/DVD images, commonly called 'ISOs'), and installer volumes for Mac OS X (DMGs). As these volumes are files which reside within another volume, they certainly are not partitions.

Example[edit]

This example concerns a Windows XP system with two physical hard disks. The first hard disk has two partitions, the second has only one. The first partition of the first hard disk contains the operating system. Mount points have been left at defaults.

In this example,

• 'C:', 'D:', and 'E:' are volumes.
• Hard Disk 1 and Hard Disk 2 are physical disks.
• Any of these can be called a 'drive'.

Nomenclature of volumes[edit]

In Linux systems, volumes are usually handled by the Logical Volume Manager or the Enterprise Volume Management System and manipulated using mount(8). In NT-based versions of Microsoft Windows, volumes are handled by the kernel and managed using the Disk Management MMC snap-in or the Diskpart command line tool.

Windows NT-based operating systems[edit]

It is important to note that Windows NT-based OSes do not have a single root directory. As a result, Windows will assign at least one path to each mounted volume, which will take one of two forms:

• A drive letter, in the form of a single letter followed by a colon, such as 'F:'
• A mount-point on an NTFS volume having a drive letter, such as 'C:Music'

In these two examples, a file called 'Track 1.mp3' stored in the root directory of the mounted volume could be referred to as 'F:Track 1.mp3' or 'C:MusicTrack 1.mp3', respectively.

In order to assign a mount point for a volume as a path within another volume, the following criteria must be met:

• The mounted-to volume must be formatted NTFS.
• A directory must exist at the root path. (As of Windows Vista, it can be any subdirectory in a volume)
• That directory must be empty.

By default, Windows will assign drive letters to all drives, as follows:

• 'A:' and 'B:' to floppy disk drives, whether present or not
• 'C:' and subsequent letters, as needed, to:
  • Hard disks
  • Removable disks, including optical media (e.g. CDs and DVDs)

Because of this legacy convention, the operating system startup drive is still most commonly assigned 'C:', however this is not always the case. Since personal computers now no longer include floppies, and optical disc and other removable drives typically still start at 'D:', letters A and B are available for manual assignment by a user with administrative privileges. This assignment will be remembered by the same OS on the same PC next time a removable volume is inserted, as long as there are no conflicts, and as long as the removable drive has not been reformatted on another computer (which changes its volume serial number), and as long as the OS has not been reinstalled on the computer.

Lacie Hard Drive One Volume Vs Two Volumes Volume

On Windows XP, mount points may be managed through the Disk Management snap-in for the Microsoft Management Console. This can be most conveniently accessed through 'Computer Management' in the 'Administrative Tools' section of the Control Panel.

More than one drive letter can refer to a single volume, as when using the SUBST command.

Warning: removing drive letters or mount-points for a drive may break some programs, as some files may not be accessible under the known path. For example, if a program is installed at 'D:Program FilesSome Program', it may expect to find its data files at 'D:Program FilesSome ProgramData'. If the logical disk previously called 'D:' has its drive letter changed to 'E:', 'Some Program' won't be able to find its data at 'D:Program FilesSome ProgramData', since the drive letter 'D:' no longer represents that volume.

Unix-like operating systems[edit]

In Unix-like operating systems, volumes other than the boot volume have a mount-point somewhere within the filesystem, represented by a path. Logically, the directory tree stored on the volume is grafted in at the mountpoint. By convention, mount-points will often be placed in a directory called '/mnt', though '/media' and other terms are sometimes used.

To use a given path as a mount-point for another volume, an empty directory (sometimes called a 'folder') must exist there.

https://hd-software.mystrikingly.com/blog/printable-password-game-cards. Unix-like operating systems use the mount command to manipulate mount points for volumes.

For example, if a CD-ROM drive containing a text file called 'info.txt' was mounted at '/mnt/iso9660', the text file would be accessible at '/mnt/iso9660/info.txt'.

Benefits of keeping files within one volume[edit]

Speed of data management[edit]

Files within a volume can generally be moved to any other place within that volume by manipulating the filesystem, without moving the actual data. However, if a file is to be moved outside the volume, the data itself must be relocated, which is a much more expensive operation.

In order to better visualize this concept, one might consider the example of a large library. If a non-fiction work is originally classified as having the subject 'plants', but then has to be moved to the subject 'flora', one does not need to refile the book, whose position on the shelf would be static, but rather, one needs only to replace the index card. However, to move the book to another library, adjusting index cards alone is insufficient. The entire book must be moved.

Lacie Hard Drive One Volume Vs Two Volumes Of One

Volume label and volume serial number[edit]

A volume label is the name given to a specific volume in a filesystem. In the FAT filesystem, the volume label was traditionally restricted to 11 characters (reflecting the 8.3 restrictions, but not divided into name and extension fields) even when long file name was enabled, stored as an entry within a disk's root directory with a special volume-label attribute bit set, and also copied to an 11-byte field within the Extended BIOS Parameter Block of the disk's boot sector. The label is always stored as uppercase in FAT and VFAT filesystems, and cannot contain special characters that are also disallowed for regular filenames. In the NTFS filesystem, the length of its volume label is restricted to 32 characters, and can include lowercase characters and even Unicode. In the exFAT filsystem, the length of its volume label is also restricted to 11 characters, but can include lowercase characters and Unicode. The label command is used to change the label in DOS, Windows, and OS/2. For GUI systems like Windows Explorer, F2 can be pressed while the volume is highlighted, or a right-click on the name will bring up a context menu that allows it to be renamed, either of which is the same process as for renaming a file. Changing the label in Windows will also change the volume creation timestamp to the current date and time for FAT filesystems. NTFS partitions have the System Volume Information directory, whose creation timestamp is set when Windows creates the partition, or when it first recognizes a repartitioning (the creation of a new volume) by a separate disk utility.

In contrast to the label, the volume serial number is generally unique and is not normally changed by the user, and thus acts as a more consistent and reliable identifier of when a volume has been changed (as when a disk is removed and another inserted). Disk formatting changes the serial number, but relabeling does not. The vol command can be used from the command line to display the current label and serial number of a volume.

References[edit]

1. ^'Understanding Disk Terminology'. Microsoft Corporation. Retrieved 2014-06-10. Partition A portion of the hard disk. In many cases, this is the entire hard disk space, but it needn't be. Volume A unit of disk space composed of one or more sections of one or more disks. Prior versions of Windows Server used volume only when referring to dynamic disks, but Windows Server 2008 uses it to mean partitions as well.
2. ^'Partitions and Volumes'. Microsoft Corporation. Retrieved 2014-06-10. In Windows Server 2008 the distinction between volumes and partitions is somewhat murky. When using Disk Management, a regular partition on a basic disk is called a simple volume, even though technically a simple volume requires that the disk be a dynamic disk.
3. ^'Use Built-In Tools to Create Partitions and Volumes in Windows Server'. Microsoft Corporation. 2008-06-18. Retrieved 2014-06-10. Windows Server 2008 simplifies the Disk Management user interface by using one set of dialog boxes and wizards for both partitions and volumes.

External links[edit]

• MSDN's article on Hard Links and Junctions